VOLspeed Giant Syncdrive Core Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 24

background image

1234_BA_E_Rev0 - VOLspeed Giant Syncdrive Sport/Pro V4

© TLI Elektronik GmbH

3

1

General information

►

Be sure to take the time to read these operating instructions carefully before starting to install the
tuning module.

►

Keep these operating instructions in a safe place, yet within easy reach, so that you always have
access to the important and safety-relevant information for use, even after installation.

►

Make these operating instructions available for reading to any other person who may ride your
tuned e-bike.

►

Ensure that every person who is allowed to ride your tuned e-bike has read and understood these
operating instructions before any use.

►

Instruct the user in the safe use of the tuned e-bike with the aid of these operating instructions
before leaving your tuned e-bike to other persons.

►

Be sure to pass this manual on to the future owner if you ever want to sell the tuning module or
your tuned e-bike.

1.1

Safety instructions

The warnings used in these instructions draw your attention to possible dangers. You endanger
yourself and others if you do not follow these instructions. Serious injuries or considerable damage
to property may result.
Warning notices are available in the following categories:

WARNING

Warns you of hazards that could result in fatal or serious injury to persons if you do not follow these
instructions.

CAUTION

Warns you of hazards that may result in minor, usually reversible injury to persons if you do not
follow these instructions.

ATTENTION

Warns you of situations that can lead to property damage and malfunctions during use if you do not
follow these instructions.

IMPORTANT

Identifies safety-relevant descriptions and instruction parts.

«
1
2
3
4
5
...
»

Содержание Giant Syncdrive Core

























Отзывы:

Нет отзывов

Похожие инструкции для Giant Syncdrive Core

Бренд: Davis Instruments Страницы: 16

Бренд: Gates Страницы: 2

AJHVF21G - HD EVF - MULTI-LANG

Бренд: Panasonic Страницы: 4

Бренд: BAC Страницы: 10

Бренд: Baby’s Journey Страницы: 2

Бренд: JETBAG Страницы: 44

Бренд: A&D Страницы: 35

Бренд: Data Aire Страницы: 82

Бренд: Factor Страницы: 15

Бренд: rako Страницы: 7

Бренд: Saft Страницы: 6

5500DN - Phaser B/W Laser Printer

Бренд: Xerox Страницы: 2

3600B - Phaser B/W Laser Printer

Бренд: Xerox Страницы: 2

Бренд: Harol Страницы: 17

Бренд: Cab Technology Страницы: 10

Бренд: Öhlins Страницы: 8

Бренд: Öhlins Страницы: 9

SmartDiag2GO GD201-O

Бренд: OCTO Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды