VOLspeed Giant Syncdrive Core Скачать руководство пользователя страница 24

Страница: 24 / 24

1234_BA_E_Rev0 - VOLspeed Giant Syncdrive Sport/Pro V4

Technical support

If you have any questions or problems, please contact us by e-mail or telephone at:
TLI Elektronik GmbH
St.-Martin-Str. 11
D-86676 Ehekirchen

[email protected]

Tel.: +49 (0) 8253 / 9279902

In addition to your request, please provide the following information:



Article number and serial number of the unit (S/N, P/N)



Bicycle manufacturer, type and year of construction



Display type (e.g. Display A)



Motor type (e.g. PW-X)

To ensure that you always have the unit data at hand, you can enter it here before installing the
unit:

Part number (P/N):

________________________

Serial number (S/N):

_________________________

Disposal

Electronic devices are recyclable materials and do not belong in household waste.

At the end of its service life, dispose of the product in accordance with the applicable
legal requirements.

036089 630968 >

Содержание Giant Syncdrive Core

























Результаты поиска

Содержание Giant Syncdrive Core

Отзывы:

Похожие инструкции для Giant Syncdrive Core

Бренды по названию

Популярные бренды

VOLspeed Giant Syncdrive Core, Руководство по эксплуатации

Результаты поиска

Содержание Giant Syncdrive Core

Отзывы:

Похожие инструкции для Giant Syncdrive Core

Бренды по названию

Популярные бренды