1234_BA_E_Rev0 - VOLspeed Giant Syncdrive Sport/Pro V4
© TLI Elektronik GmbH
17
7
Speed mode
When Speed mode is activated, the speed limit for motor assistance is raised. The limit can be freely
set in the range 25 to 45km/h (15.5 to 28mph). When the e-bike is switched off, the speed mode is
automatically switched off and must therefore be reactivated when the e-bike is switched on again.
Note displays / control units
The following illustrations show examples of the Ridecontrol ONE / ERGO-SG control
unit and the Ridecontrol PLUS display. For all other displays, press the corresponding
buttons on the control unit. The RideControl app can also be used as a display.
7.1
Switch on
Switch on the e-bike and, if necessary, the display and quickly enter the
following sequence using the buttons for changing the assistance levels:
- + - +
Individual activation code
If you have set an individual activation code in accordance with the instructions in
chapter 8 enter this instead.
The speed limit is displayed for 5 seconds. If desired, you can change the limit
with the "Plus" and "Minus" keys. Possible values: 25 to 45km/h (15.5 to
28mph). Default value 32km/h (20mph). The set value is saved.
The speed mode is now activated.
7.2
Switch off
Enter the following sequence:
- + - +
The display shows 25km/h for 3 seconds. The speed mode is off.
