Vollrath Stoelting M202, Руководство оператора

Страница: 15 / 32

Owner’s Manual #513666 9 M202B Model Machines
Section 3 - Initial Set-Up And Operation
3.1 OPERATOR’S SAFETY PRECAUTIONS
SAFE OPERATION IS NO ACCIDENT; observe these rules:
A.
Know the machine. Read and understand the
Operating Instructions.
B. Notice all warning labels on the machine.
C. Wear proper clothing. Avoid loose fitting garments,
and remove watches, rings or jewelry that could
cause a serious accident.
D. Maintain a clean work area. Avoid accidents by
cleaning up the area and keeping it clean.
E. Stay alert at all times. Know which switch, push
button or control you are about to use and what
effect it is going to have.
F. Disconnect electrical cord for maintenance. Never
attempt to repair or perform maintenance on the
machine until the main electrical power has been
disconnected.
G. Do not operate under unsafe operating conditions.
Never operate the machine if unusual or excessive
noise or vibration occurs.
3.2 OPERATING CONTROLS AND INDICATORS
Before operating the machine, it is required that the op-
erator know the function of each operating control. Refer
to Figure 3-1 for the location of the operating controls on
the machine.
WARNING
Moving machinery can grab, mangle and dismember.
Place the Freezing Cylinder Off/On switch in the
OFF position before disassembling for cleaning or
servicing.
A. Freezing Cylinder Off/On
The Freezing Cylinder OFF/ON switch is a two-
position rocker switch that supplies power to the
freezing cylinder control circuit. When the switch
is in the OFF position, the freezing cylinder’s
refrigeration system and auger do not operate.
When the switch is in the ON position, the freezing
cylinder is operational.
Figure 3-1 Machine Controls
IntelliTec Control
(See Figure 3-2)
Product
Selector
Switch
Freezing
Cylinder Off/On