Convenience turn signal
To operate the convenience turn signal, push the turn signal and main beam lever up or down to
the point where you meet resistance and then release the lever. The turn signal flashes 3 times.
To cancel the convenience turn signal, immediately move the lever in the opposite direction up to
the pressure point and then release it.
The convenience turn signal can be activated and deactivated in the Infotainment system in
the
Vehicle settings
menu
⇒
Operation and display in the Infotainment system
:
The hazard warning lights also work when the ignition is switched off
⇒
In an emergency
.
Some settings can be stored in the user accounts of the personalisation function and
therefore change automatically when the user account changes
⇒
Personalisation
.
Vehicle lighting
Switching lights on and off
Fig. 97
Next to the steering wheel: light switch (one variant).
Switching lights on
• Switch on the ignition.
• Turn the light switch to the appropriate position.
Automatic headlights: the dipped beams are switched on or off automatically depending on
the brightness level and the weather
⇒
,
⇒
Automatic headlights
.
The side lights
and daytime running lights are switched on. The symbol in the light switch lights up green.
The
dipped beam headlights are switched on.
Switching off the lights
• Switch off the ignition.
• Turn the light switch to the appropriate position.
The lights are switched off.
Leaving Home function (orientation lighting) may be switched
on
⇒
Coming Home and Leaving Home function (orientation lighting)
.
Side lights or
continuous parking light on both sides of the vehicle switched on
⇒
Switching the parking lights on
and off
. The symbol in the light switch lights up green.
Dipped beam switched off – the side
lights remain on while the vehicle key is in the ignition lock and while the driver door is closed in
vehicles with Keyless Access.
Daytime running lights
The daytime running lights (dependent on equipment level) can increase the visibility of your
vehicle in traffic during the day.
The daytime running lights are switched on every time the ignition is switched on when the light
switch is in position ,
or
(when brightness is detected).
The daytime running lights cannot be switched on or off manually.
Incorrect use of turn signals, a failure to use turn signals, or forgetting to switch off a turn
signal can confuse other road users. This can lead to accidents and serious injuries.
• Always activate the turn signal in good time when changing lanes and performing
overtaking or turning manoeuvres.
• Always switch off the turn signal once the lane change or overtaking or turning
manoeuvre has been completed.
WARNING
