Manual anti-dazzle interior mirror
• Basic position: the lever on the lower part of the mirror is pointing towards the windscreen.
• Pull the lever to the back to select the anti-dazzle function
⇒
Fig. 105
.
Exterior mirrors
Fig. 106
In the driver door: rotary knob for the exterior mirrors.
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
• Switch on the ignition.
• Turn the rotary knob in the driver door to the desired symbol
⇒
Fig. 106
.
• Press the rotary knob in the direction of the arrows to the front, rear, right or left in order to
adjust the exterior mirror.
Fold exterior mirrors into the body electrically
⇒
.
Switch on the exterior mirror heating.
The exterior mirror heating heats only at ambient temperatures below +20°C (+68°F) and initially
with the highest setting. Heating takes place dependent on the ambient temperature after around
two minutes. Adjust the left-hand exterior mirror. Adjust the right-hand exterior mirror. Neutral
position. The exterior mirror cannot be adjusted and all functions are switched off.
Activating the exterior mirror functions
• Activate the corresponding exterior menu function in the displayed menu.
Synchronised mirror adjustment
The synchronous mirror adjustment function simultaneously adjusts the right exterior mirror when
the left exterior mirror is adjusted.
• Turn the rotary knob to position .
• Adjust the left-hand exterior mirror. The right-hand exterior mirror will be adjusted at the same
time (synchronised).
• If necessary, correct the settings for the right-hand exterior mirror: move the rotary knob to
position and adjust the right exterior mirror.
Folding in the exterior mirrors while parking
The exterior mirrors fold in and out automatically when the vehicle is locked and unlocked from
outside. For this purpose, the rotary knob must be in the position
, , or .
If the rotary knob for the electrically adjustable exterior mirrors is in the position
, the exterior
mirrors will remain folded in.
Storing and activating front passenger exterior mirror settings for
reversing
• Select a valid vehicle key to which you wish to assign the setting.
• Unlock the vehicle with this vehicle key.
• Apply the electronic parking brake.
• Switch on the ignition.
• Put the gearbox in neutral position.
• Select reverse gear.
• Adjust the front passenger exterior mirror so that you can see the kerb area, for example.
• The settings for the mirror position will be saved automatically and assigned to the vehicle key.
• Turn the rotary knob for the exterior mirrors to position .
The illuminated display from a mobile navigation device can lead to functional impairment
of the interior automatic anti-dazzle mirror and cause accidents or serious injuries.
• You may not be able to precisely determine the distance from vehicles travelling
behind you or from other objects if the automatic anti-dazzle function is impaired.
WARNING
