Fig. 110
In the upper section of the centre console: Climatronic controls.
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
Some functions and buttons may vary according to the vehicle equipment and the type of system
installed.
Switching off
• Press the
button (vehicles without auxiliary heater).
• Turn the centre rotary control left as far as it will go.
• Touch the
function button in the Infotainment system
⇒
Operating the Climatronic
system via the Infotainment system
.
– Infotainment system
• Press the
button to open the Climatronic air conditioning settings in the Infotainment
system
⇒
Operating the Climatronic system via the Infotainment system
.
– Synchronising the temperature settings
• Press
to transfer the temperature settings for the driver side to the front passenger
side.
– Automatic mode
The automatic mode ensures constant temperatures in the vehicle interior. The air temperature, air
quantity and air distribution are regulated automatically. Automatic mode switches off if ventilation is
adjusted manually.
– Cooling mode
• Press
to switch cooling mode on or off.
In cooling mode, the air is dehumidified.
– Maximum cooling
•
m/k/a995MK
Manual air conditioning system: turn the left rotary control to position
⇒
Fig. 109
. Air recirculation mode is switched on automatically.
•
m/k/a995MK
Climatronic: press the
button
⇒
Fig. 110
. Air recirculation
mode is switched on automatically and the Climatronic air distribution is automatically set to
position.
/
– Temperature
•
m/k/a995MK
Manual air conditioning system: turn the left rotary control
⇒
Fig. 109
.
•
m/k/a995MK
Climatronic: turn the outer rotary controls
⇒
Fig. 110
to adjust the
temperatures for the driver and front passenger sides.
The set temperatures are displayed above the outer rotary controls for Climatronic.
– Seat and steering wheel heating
• Press the buttons
or
to switch the seat heating on and off
⇒
Seat heating
.
To operate the seat heating and steering wheel heating at the same time with the button
,
pair the two functions via the air conditioning menu in the Infotainment system
⇒
Switching the
steering wheel heating on or off together with the seat heating (only in vehicles with Climatronic)
.
– Immediate heat button for auxiliary heater
• Press the
button to switch the auxiliary heater on and off when the ignition is switched off
⇒
.
The auxiliary heater provides additional heating when the ignition is switched on.
– Residual heat
If the ignition is switched off and the engine is warm, the residual heat from the engine is used to
continue to heat the vehicle interior. The function is switched off after 30 minutes and if the 12-volt
vehicle battery has a low charge level.
– Blower
• Turn the middle rotary control.
