Red and green frames: vehicle outline (mode 2).
Trailer support (mode 3)
In vehicles with a factory-fitted towing bracket, the trailer support function can be used when
approaching a trailer drawbar. The powerful zoom level used in this mode means that obstacles
behind the vehicle appear very late.
Auxiliary lines are shown on the Infotainment system.
Red line: position of the towing bracket.
Green lines: distance to towing bracket. The distance intervals are around 0.1 m in each case.
Orange line: predicted path of the towing bracket, depending on the steering angle.
Crossing traffic (mode 4)
This display representation helps the driver to monitor traffic behind the vehicle and can be used in
situations such as driving out of a garage or narrow exits, for example.
Prerequisites
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
The following prerequisites must be met for detection of a parking space:
• Do not exceed a speed of approximately
15 km/h (9 mph)
.
• Width of the parking space:
vehicle width + 0.2 m
.
• Distance: position the vehicle approximately
one metre
from the parking space (mode 2 only).
• Length of the parking space:
approx. 8 m
(mode 2 only).
The following conditions must be met in order to display a correct image:
• The boot lid is closed.
• The surrounding area has a flat surface.
• Vehicle does not have a heavy load at the rear.
Parking perpendicular to the road (mode 1)
Fig. 155
Infotainment system screen display: parking using the rear view camera system, mode 1.
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
Key to
⇒
Fig. 155
:
Road.
Parking space.
Side limit of the parking space.
Rear limit of the parking space.
Driving into a parking space
• Press the
or
button before driving past the selected parking space.
• With the rear view camera system switched on and operational, select mode 1
.
• Position the vehicle in front of the parking space
⇒
Fig. 155
②
.
• Steer so that the yellow lines
③
lead into the parking space
. The green and yellow lines
must be aligned with the side limit lines
③
.
