Check the system settings after charging or replacing the 12-volt vehicle battery. System
settings may be adjusted or deleted if the power supply is interrupted.
Operating using the wiper lever
Fig. 24
On the right of the steering column: buttons on the wiper lever (illustration).
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
If any priority 1
⇒
Instrument cluster
warnings are displayed, you will be unable to open any
menus. Some warnings can be confirmed and hidden with the
⇒
Fig. 24
①
button.
Selecting a menu or information display
• Switch on the ignition.
• Personalisation: select user.
• If a message or vehicle pictogram is displayed, press the
⇒
Fig. 24
①
button, several times if
necessary.
• To display the menus
⇒
Instrument cluster menus
or to return from a menu or an information
display to the menu selection, hold down the rocker switch
⇒
Fig. 24
②
.
• To browse through the menus, press the rocker switch up or down.
• To open the displayed menu or information display, press the
⇒
Fig. 24
①
button or wait until
the menu or information display opens automatically after a few seconds.
Making settings in menus
• In the displayed menu, press the rocker switch
⇒
Fig. 24
②
up or down until the desired menu
option is marked. A frame appears around the selected option.
• Press button
⇒
Fig. 24
①
to make the necessary change. A tick indicates that the particular
system or function is active.
Returning to the selection menu
Select the menu option
Back
in each case to leave the current menu.
If warning messages about malfunctions are displayed when the ignition is switched on, it
may not be possible to adjust some settings as described, or the information display may appear
differently. If this is the case, take the vehicle to a qualified workshop to have the malfunction
rectified.
Operating using the multifunction steering wheel
Fig. 25
Right-hand side of the multifunction steering wheel: controls for using the menus and
information displays in the instrument cluster.
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
Accidents and injuries can occur if the driver is distracted.
• Never operate the menus on the instrument cluster display while the vehicle is in
motion.
WARNING