69
Report to PC + dialtone –
the GSM gateway sends
information on an incoming call to the PC equipped with
the call routing software. The DTMF with a simulated
dialtone may be enabled for the incoming call.
7.11.2.
DISA DTMF digits
Minimum digits in DTMF
- the minimum number of digits
required by the gateway in the DTMF.
Maximum digits in DTMF -
the maximum number of digits
accepted by the gateway in the DTMF.
Timeout while inputing DTMF digitst [s]
– a timeout during
which the GSM gateway waits for the first / another DTMF
digit. If
0
is selected, the incoming call is connected
automatically to the numbers included in the
List of called
numbers
.
7.11.3.
CLIP
Replace “+” by expression
- the '
+'
character from the CLIP
is replaced with a sequence of digits included in this field.
Example:
Calling party identification (CLIP) is +420602123456
a)
“Replace „+“ by expression“: {empty}
CLIP sent to the PBX is: 420602123456
b)
“Replace „+“ by expression“: +
CLIP sent to the PBX is: +420602123456
c)
“Replace „+“ by expression“: 00
CLIP sent to the PBX is: 00420602123456
7.11.4.
List of called numbers
The list of called numbers, which will be called to ISDN
network in case that an incoming call from GSM network will
not contain correct called party number or the timeout
Wait for
next digit [s]
expires. Numbers are dialed down from top.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299