2N
®
BRI Lite gateway
32
AutoCLIP routing table. After the message is replayed, the gateway waits for the
first DTMF digit for a timeout defined in the
GSM incoming calls – Timeout while
inputing DTMF digits [s]:
table. Having received the count of digits defined in
GSM incoming calls – Minimum digits in DTMF
, the gateway activates the PBX
or telephone connection with the number received by the DTMF via the ISDN
port. For more details on the gateway configuration refer to Section 7.
To establish connection with a lower count of digits than defined in
GSM
incoming calls – Maximum digits in DTMF
, terminate the dialling with the '
#'
character. When the DISA does not receive the pre-programmed count of digits or
the '
#'
character, the connection is not established. Therefore, enable the operator
service while activating the DISA function (in the router mode only, no '
#
' is
needed in the PBX mode).
There are three ways to program the DISA voice message into the gateway:
Record DISA using configuration program
Record the voice message from GSM telephone
Record DISA into your PC and save the
wav
file into your
gateway using the XMODEM protocol and defined AT
commands.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299