7
2.2. Brief Installation Guide
Proper mounting
– 2N
®
BRI Lite is designed for suspension
on a vertical surface. Fit the holder included in the delivery on
a wall and hang the gateway on it. For details on the prescribed
working position and other recommendations refer to Subs.
2.3.
Cable connection
– connect the gateway using ISDN cable
to your ISDN PBX (or any other ISDN terminals). For more
details on proper wiring refer to Subs. 2.4.
Antenna connection
– connect an internal antenna or
an external antenna cable into the SMA antenna connector.
Place the external antenna on a place with a good GSM /
UMTS signal (refer to Subs. 2.5).
Gateway power supply
– the delivery includes a mains
adapter. Plug in the adapter connector into the gateway and the
power
adapter into a wall socket. The gateway turns
on immediately (see Subs.2.6).
SIM card insertion
– SIM cards are inserted in holders
on the gateway top. The SIM card holder is of the push/pull
type, which means that all you have to do is insert a SIM card
and press the holder gently until it snaps into position (see
Subs.2.7). Secure the SIM card with a latch to avoid incidental
removal.
!CAUTION!
If you use SIM cards with active PIN
protection, first set an identical PIN code for all SIM cards
used in the GSM gateway, save it into the GSM gateway
configuration and only then insert the SIM cards in the GSM
gateway.
PC connection
– the gateway parameters are normally set
using the configuration software available on the CD included
in the delivery. To interconnect your PC with the GSM ISDN
gateway use the RS323 cable included in the delivery
*
.
Configuration program installation
- run the installation file
from the installation CD on a PC connected to the gateway
and install the configuration software (refer to Subs. 6.1).
*
according to the order number
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
