57
No module / GSM group is ready –
call rejection due to the
busy status of all modules that have been selected for routing
calls to the particular destination and alternative GSM modules
that have been selected routing calls to the particular
destination in case of congestion (default = 42 – Switching
Equipment Congestion).
Complete list of available release cause you find under button “?”.
7.7.6. Numbering plan settings
These parameters are for set „numbering plan“ values for Called party (CDN) and
calling party number (CGN).
7.7.7. Don’t send „Connect ACK“ to BRI2 – TE
Removal of the TE progress from corfirmation message in ISDN communication.
It is neccessary to use this parameter with some of Alcatel PBXes (e.g. Alcatel
4400).
7.7.8. Receive dial also from “Subaddress” element
Some ISDN terminal are sending letters “#” and “*” as Keypad facility dial mode.
With activate this parameter gateway will convert this dial to Called party
number.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
