VocoPro GIG-MASTER, Руководство пользователя

Страница: 33 / 35

32
Troubleshooting
Make sure the MAIN POWER switch on the
rear panel is switched ON.
Does the disc exceed the specified rating
level? (Insert a disc within the correct data
parameters)
Is the disc dirty? (ensure the disc is not dirty
and clean it if necessary)
Are you using the proper TV format (PAL or
NTSC) that corresponds to your TV.
(Check to see what format your TV is.)
Are the audio connections firmly attached?
Check audio connections to external devices.)
Is the remote control too far from the main
unit? Is there something in the way? (Get
within the recommended operating range,
approx. 23 feet, of the remote control; remove
obstacles.)
Is the GIG-MASTER in sunlight or strong
fluorescent light? (Relocate the GIG-MASTER
so that the line of sight is not hindered by such
lighting.
make sure the power cord is plugged firmly
into the back of the GIG-MASTER and into a
live outlet.
Is there condensation inside the DISC
PLAYER?
Are the video connections firmly attached?
(reconnect video connections to make sure)
Is the GIG-MASTER connected directly to
the television selector switch, or a television
with a built in video deck?
(The picture may be bad when used with
some television sets or projectors, due to
the DVD copy protection scheme.)
(The picture quality may also suffer if the
DVD player is connected through a selector
switch with other video equipment. Try
turning off the power to the other video
equipment.)
(The picture quality may be poorer when
paused, when doing Frame Advance, or
during fast forward or fast reverse. This is
normal.)
Is the DVD player connected correctly?
(Check audio connections to external
device.)
Is the connected audio equipment turned
on? Is the volume set correctly?
(Note: There will be no audio playback
during slow playback, Frame Advance, fast
forward, or fast reverse.)
Are the video cables attached firmly to the
proper outputs on the GIG-MASTER and
inputs on the TV or Monitor?
Is the TV set to receive signal from the
proper input? (i.e. AV1, AV2, etc.)
-Are the remote control batteries installed
correctly?
(Check battery polarities.)
Are the remote control batteries running
low? (Put in new batteries.)
Problems Solutions
The power does not come on
A Disc does not play. Playback stop
almost immediately.
The picture is bad.
There is no picture on the screen.
The remote control does not work, or
does not work correctly.