VocoPro GIG-MASTER, Руководство пользователя

Страница: 11 / 35

10
Getting Connected Cont...
MICROPHONE/INSTRUMENT INPUT CONNECTION
After completing your main system connections, it is time to get your microphones and instruments con-
nected and ready for performing. Before you get started with your connections we recommend that you take
the following tips into consideration:
• When connecting instruments, refrain from using low quality or worn cables as they can cause
significant noise and loud pops, posing a threat to the system’s speakers.
• Use caution when connecting a chain of multiple effects pedals, as the output voltage may change
and possibly overload the GIG-MASTER’s input channel.
The GIG-MASTER has one guitar (¼”), one keyboard (¼”) and two microphone (¼”/XLR) inputs.
NOTE: Both the XLR and ¼” mic inputs cannot be used simultaneously.
To connect MICROPHONES via ¼” mic cables, connect the XLR-end of the cable into the MICROPHONE until
it locks into place and connect the ¼” plug into either the MIC 1 or 2 jack on the GIG-MASTER.
To connect MICROPHONES via XLR mic cables, attach the XLR “female” end of the cable into the “male”
three prong jack located at the base of your handheld MICROPHONE until it locks into place. Then
connect the XLR “male” jack at the other end of the cable into either of the BALANCED MIC 1 or 2 inputs on
the GIG-MASTER’s rear panel. It should be obvious which sides of your XLR cable are male and female as
there is only one possible connection.
To connect a GUITAR, connect a ¼” instrument cable from the GUITAR’s ¼” output to the GIG-MASTER’s ¼”
GUITAR input.
To connect a KEYBOARD, connect a ¼” instrument cable from the KEYBOARD’s ¼” output to the GIG-MAS-
TER’s ¼” KEYBOARD input.
To Mic 1 Input
To Mic 2 Input
*The balanced XLR
mic inputs on the rear
panel can be used
instead of the 1/4" mic
inputs