VocoPro GIG-MASTER, Руководство пользователя

Страница: 13 / 35

12
Front Panel
1 2
3 4
5 6 7 8 9
10
1.
INPUT
- This button toggles through all the INPUT channels (DVD, AV 1/2/3) for available INPUT
SOURCES.
2.
POWER/STANDBY
- This button is used to turn the GIG-MASTER ‘ON’ or place it in STANDBY mode.
NOTE: When in STANDBY mode, the GIG-MASTER is not completely powered down and still contains residual power. This button
will not turn the GIG-MASTER on if the MAIN POWER switch on the rear panel is switched off. To completely turn the power off,
use the MAIN POWER switch on the rear panel of the GIG-MASTER.
3. GRAPHIC DISPLAY - This panel displays all graphical information regarding system operations,
settings and performance.
4. DIRECT TRACK ACCESS - These buttons allow for DIRECT TRACK selection. For tracks 10 and
up, press the +10 button. For example, to go directly to track 13, you would press +10 and 3, and for
track 22, you would press +10, +10 and 2.
5. REMOTE SENSOR - This sensor receives infrared signals transmitted by the REMOTE CONTROL
transmitter.
NOTE: Obstacles located between the remote control and remote sensor should be avoided as they can prevent signal recognition.
6. STOP - This button is used to STOP disc PLAYBACK.
7. PLAY - This button is used to initiate disc PLAYBACK.
8. PAUSE - This button is used to PAUSE disc PLAYBACK.
9. PBC - The PBC (play back control) button toggles the PBC mode ON/OFF. When in PBC mode, you
can use direct access to tracks/scenes by using the NUMBER PAD on the REMOTE CONTROL. This
feature is used primarily with VCD, MP3 and PHOTO-CD discs. NOTE: Not all discs have PBC support
coding. Check to make sure a disc has PBC support before trying to use the feature. Pressing the PBC
button during the playback of a track/scene will cause the playback to stop and restart.
10. PREV - This button is used to go back to a PREVIOUS track.