manualshive.com logo in svg

Vmetro M5210RP-EFF, Руководство пользователя, Страница: 21 / 130

Поделиться
Скачать
Vmetro M5210RP-EFF Скачать руководство пользователя страница 21

7

Issued June 20, 2007 

M5000 Series: User Guide

Main Components

JTAG Interfaces

The JTAG chain is separated into three segments. One segment contains the CPLD devices, a 
second contains the AMCC 440GX processor and the last one contains the remaining JTAG 
capable chips.

It is possible to connect to only the segments that are appropriate for a specific software tool.

An adapter board is needed to connect to the correct taps of the chain, and to provide connectors 
that are compatible with the tools connector. For more information please contact VMETRO.

Temperature Sensors

Temperature sensors are very useful when monitoring applications during extreme conditions. 
Several temperature sensors are located on the board in order to monitor the variation of 
temperature. Four sensors are on the component side: one close to the bottom of the board, one 
close to the top of the board and two located in the middle of the board.

These sensors require additional software, contact VMETRO for information.

Power Supplies (DC-DC converters)

The main source of power is the 5V supplied from the VME backplane. The following voltages are 
generated: 3.3V, 2.5V, 1.8V and 1.5V.

Содержание M5210RP-EFF



































































































































Отзывы:

Нет отзывов