S
ecti
on 3
- P
rog
rammin
g
Operation Manual
VKI Publication #100308-003
84
Security
The Security screen is used to assign or change PIN numbers, and grant/remove access to
individual sections of the machine programming.
There are two tabs on this screen - Administrator and Operator. The Operator is generally the
owner of the equipment, and the Administrator is the person responsible for the equipment at
the account. The Operator has complete access to the programming menus and sets the rights
for the Administrator, who has limited access.
In the example below, you'll notice that the Administrator has only two accessible menus, while
the Operator has access to all of the menus. It is the Operator who decides what access is
granted to the Administrator, and in this case, the Administrator only has access to the
Dashboard and General menus.
The information in the Operator section applies only to someone logged in as
an Operator. If logged in as an Administrator, the Operator tab is not
accessible to you.
