VKI Technologies KEURIG Eccellenza touch Скачать руководство пользователя страница 103

Страница: 103 / 108

ecti

on
5 –

rro
r M
es

sages

Eccellenza Touch

VKI Publication #100308-003

103

Code

Message Displayed

Condition

Action(s) Required

M6,

Coffee Dispensers current is under

minimum operation level

Coffee dispenser motor current is

below the minimum operating level.

1 - Check wiring and connections to

the coffee dispenser motor.

2 - The coffee dispenser may not be

engaged with the dispenser motor.

3 - The coffee dispenser motor

coupling may need to be replaced.

4 - If message persists, replace the

coffee dispenser motor.

Brewer current is over safety level

Brewer current has exceeded the

maximum operating level.

1 - The brewer may be seized/jammed.

2 - The brewer motor may need to

be replaced.

Brewer current is under minimum

operation level

Brewer current is below the

minimum operating level.

1 - Check the wiring and

connections to the brewer motor.

2 - The brewer motor may need to

be replaced.

Brewer Inversion

Brewer is going in the wrong

direction.

Wiper is going in the wrong

direction (detected by the activation

of the wrong switch).

1 - Check the wiring and

connections to the brewer motor.

2 - Check wiring and connections to

the wiper motor switches.

3 - One, or both, of the wiper motor

switches needs to be replaced.

Brewer Not Counting

The brewer quadrature encoder is

not returning any count.

1 - Clear the message.

2 - Reboot the machine.

3 - If message persists, replace the

brewer motor.

Brewer Not Initialized

A brewer sequence was started

while the brewer was not initialized.

1 - Reboot the machine to initialize

the brewer.

Brewer Over Current

Standby

The brewer current was over the

configured stand by operation level.

1 - Clear the message.

2 - Reboot the machine.

Brewer Safety Fault

The IC of the brewer driver is in

fault.

1 - Clear the message.

2 - Reboot the machine.

3 - If message persists, replace the

brewer motor.

Brewer Timeout

Brewer motion is timed out: brewer

is moving too slow, and unable to

reach required position in the

allotted period of time.

1 - Check the wiring and

connections to the brewer motor.

2 - The brewer motor may need to

be replaced.

Brewer Unexpected Item

Received

A brewer sequence step was

received while a wiper sequence

was already in progress.

1 - Clear the message.

2 - Reboot the machine.

3 - If message persists, replace the

brewer motor.

M10

Wiper current is over safety level

The wiper motor current was over

the configured maximum operation

level.

1 - The wiper may be jammed or

binding.

2 - The wiper motor may need to be

replaced.

Wiper current is under minimum

operation level

The wiper motor current was under

the configured minimum operation

level.

1 - The wiper may be missing or

improperly installed.

2 - Check wiper motor connections.

3 - The motor may need to be replaced

Wiper Inversion

The wiper limit switches are

inverted.

1 - Reverse the wiring connections

to the wiper switches.

Wiper Not Initialized

A wiper sequence was started while

the wiper was not initialized

(homed).

1 - Clear the message.

2 - Reboot the machine.

3 - If message persists, check wiper

motor switches and connections.

4 - If message persists, a wiper

motor switch needs to be replaced.

Wiper Over Current

Standby

The wiper current was over the

configured stand by operation level.

1 - Clear the message.

2 - Reboot the machine.

Содержание KEURIG Eccellenza touch













































































































Результаты поиска

Содержание KEURIG Eccellenza touch

Отзывы:

Похожие инструкции для KEURIG Eccellenza touch

Бренды по названию

Популярные бренды

VKI Technologies KEURIG Eccellenza touch, Руководство по эксплуатации

Результаты поиска

Содержание KEURIG Eccellenza touch

Отзывы:

Похожие инструкции для KEURIG Eccellenza touch

Бренды по названию

Популярные бренды