Vixen AP Equatorial Mount, Инструкция по эксплуатации

Страница: 64 / 72

64
APPLICATION
Upgrading the AP Photo Guider to the AP Mount with Dual-axis Motor Drive
Declination body Declination body
Declination body Declination body
Window Window
Hook Hook
Mount head unit Mount head unit
Mount head base Mount head base
R.A motor module R.A motor module
4mm Allen wrench 4mm Allen wrench
4mm 4mm
Allen wrench Allen wrench
Electrical contact Electrical contact
Electrical contact Electrical contact
Electrical contact Electrical contact
R.A motor module R.A motor module
AP declination body unit AP declination body unit
1
Loosen the 3 setscrews on the side of the mount head with the 4mm
Allen wrench. Remove the mount head. The mount head base (black)
is exposed.
2
Loosen the two screws on the mount head base with the 4mm Allen
wrench and remove the mount head base.
3
Attach the AP declination body unit onto the exposed R.A motor
module.
To remove the declination body cover, open up the polar scope
window on the declination body by sliding down the shutter. While
pushing down on the hook on the bottom of the declination body, pull
out the declination body cover by pinching the hook and window hole
as shown in the figure.
4
Attach the declination body onto the R.A motor module so that the
electrical contact on the declination body fits snugly onto the counter-
part on the R.A motor module as shown in the figure.
The internal joint electrical contact of the declination body is very
delicate. Take care not to touch with fingers or other objects.
Caution:
Necessary Parts (Optional)
· AP Clamp Mount Head Unit
· DEC Motor Module
· AP Declination Body Unit
· Counterweight Bar Unit
· Counterweight