5 Loc-10TxSIS Transmitter
Page 28 of 57
5.2 Transmitter
Battery
In most markets the transmitter is shipped with alkaline batteries (12 x D cells) unless rechargeable batteries
are specified. Batteries are fitted into quick release trays – the alkaline is an open pack, to enable the
batteries to be changed. The rechargeable pack is a sealed unit containing Ni-MH (Nickel Metal Hydride)
batteries. These packs can only be fitted in a manner to ensure that the alkaline batteries cannot be
inadvertently charged.
5.2.1
Removing the Battery Tray
5.2.2
Replacing the Alkaline Battery
To access batteries – undo stainless steel screws on each battery cover
To remove batteries – turn tray upside down and give a short sharp tap of the battery tray on your hand
Replace batteries with new batteries of the same type, be sure not to mix old and new batteries
Do NOT use rechargeable batteries in the alkaline battery tray. Ensure that batteries are inserted the
correct way (see label and molded “+” and “-” in the bottom of the tray)
Refit the battery cover – then refit the battery tray
WARNING
Alkaline Batteries – insert alkaline batteries (x12) as shown:
5.2.3 Rechargeable
Batteries
Do NOT attempt to replace the rechargeable batteries or remove battery covers – return to Vivax-
Metrotech or a Vivax-Metrotech approved service centers for replacement.
WARNING
Use only Vivax-Metrotech recommended charger.
Push up button
Pull out bottom of catch
Lift up catch until it clears catch plate
[email protected] | 13309 Beach Ave. Marina del Rey, CA 90292 | Phone: 800-WCT-PROD (800-928-7763) | Fax: 310-306-9343
