Vivax Metrotech vLoc-5000, Руководство пользователя

Страница: 8 / 63

1 General Safety & Care Information
Page 3 of 57
1.6 Care When Interpreting the Information Provided by the
Locator

Like all locators – this instrument is locating, and providing depth and current readings based on
electromagnetic signals that radiate from the buried cable or pipe. In most cases these signals will enable
the locator to pinpoint both position depth and current correctly.

BEWARE – in some cases other factors will distort electromagnetic fields radiating from cable or pipe
being located, resulting in incorrect information.

Always locate responsibly, and use information learned during your training to interpret the information
provided by the locator.

Do NOT provide information regarding depth of cable or pipe to anyone unless authorized to do so by
your company.

REMEMBER that depth measurements are to the center of the electromagnetic field or pipe – In the case
of pipes this may be significantly deeper than the top of the pipe.
1.7 American & Canadian Safety Notices
USA

This transmitter and receiver comply with the general conditions of operation, pursuant to part 15 of the
FCC Rules.

CFR 47 Part 2

CFR 47 Part 15

Changes or modifications not expressly approved by the manufacturer could void the user’s authority to
operate the products.
CANADA

Equipment is for use by trained operators only, and not for general household or consumer use.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference that may cause undesired operation of the device.
EUROPE

Vivax-Metrotech confirms that the location system is compliant with relevant provision of European
directive 1999/5/EC.

EN 55011

EN 61000-4-2: A1 & A2

EN 61000-4-3

EN 61000-4-8: A1

ETSI EN 300 330-2

ETSI EN 301 489-1

ETSI EN 301 489-3
info@wctproducts.com | 13309 Beach Ave. Marina del Rey, CA 90292 | Phone: 800-WCT-PROD (800-928-7763) | Fax: 310-306-9343