7 Accessories & Options
Page 53 of 57
7.6
Receiver Vehicle Charging Lead(Optional)
12ft
(4m)
long lead to charge the receiver’s battery (Lithium-ion) while
on the move.
It is preferable to connect the charger to a cigarette lighter socket that is
permanently live. However, do NOT leave connected to the receiver for
excessively long periods.
7.7 Sonde
(Optional)
D18-33-SR44 Sonde
0.75in
(18mm)
x 3.1in
(80mm)
long, 33
kHz, range 12ft
(4m)
.
2 x button cell batteries.
D38-33-AA Sonde
1.5in
(38mm)
x 4.1in
(105mm)
long, 33
kHz, range 15ft
(5m)
.
1 x AA battery.
D64-33-LR61 Sonde
2.5in
(64mm)
x 7.3in
(186mm)
long, 33
kHz, range 24ft
(8m)
.
1 x LR61 battery.
D23F-512-AA / D23F-640-AA Sonde
1in
(23mm)
x 18in
(456mm)
long, range
20ft
(7m)
.
“Flexible (3 section) Sonde with optional
512Hz or 640Hz for use in cast iron
pipes”.
1 x AA battery.
7.8 Clamp
(Optional)
VX2/50, VX4/100, VX5/125, VX18/450F
Dia.
2in
(50mm)
, Dia. 5in
(125mm)
, Dia. 4in
(100mm)
, 18in flexible
(Circumference 450mm)
An accessory used to apply the transmitter signal to an insulated line, removing the need to connect the
transmitter signal directly to a conductor or cable sheath.
7.9 Lithium-ion
Rechargeable Battery Pack (Standard)
The Lithium-ion rechargeable battery pack is supplied as standard. Use
the battery charger listed below to charge the battery pack. Charging is
done with the battery inside the receiver.
[email protected] | 13309 Beach Ave. Marina del Rey, CA 90292 | Phone: 800-WCT-PROD (800-928-7763) | Fax: 310-306-9343