VITO PRO-POWER VIGI2000, Инструкция по эксплуатации

Страница: 52 / 72

52
FREQUENTLY ASKED QUESTIONS / TROUBLESHOOTING
Question/ problem - Cause
Causa
Solution
The combustion engine doesn’t start:
•
The fuel tank is empty;
Clogged fuel pipe;
Fuel pipes misplaced or bent;
•
The fuel in the tank is of poor quality, is dirty or is
already old;
•
Spark plug cap off spark plug;
The ignition cable isn’t properly connected;
•
The spark plug has soot or is damaged;
Incorrect distance between the electrodes;
•
The engine switch is not in the "ON" position”;
•
There's not enough compression. Little strength is
necessary to pull the recoil starter.;
•
The air filter is dirty;
•
The combustion engine is "wet" due to several
attempts to start it;
•
Very low engine oil level;
Generator too inclined;
•
The chocke lever is not on OFF position;
•
Add fuel;
Clean the pipes;
Place the fuel pipes correctly or straighten it;
•
Use new fuel (unleaded petrol).
•
Fit the spark plug cap onto the spark plug;
Check the connection between the cable and the
plug;
•
Clean/replace the spark plug;
Adjust the distance between electrodes;
•
Set the engine switch to "ON";
•
Check that the spark plug is screwed. If not, screw
it;
•
Clean/replace the air filter;
•
Remove the spark plug and dry it, pull the recoil
starter several times, with the spark plug
unscrewed;
•
Add oil until you reach the right level;
Place generator on flat floor;
•
Turn the chocke lever to OFF position;
Difficulties when starting or the engine power drops:
•
Water on the fuel tank and on carburetor;
•
The fuel tank is dirty;
•
The air filter is dirty;
•
The spark plug has soot;
•
Empty the fuel tank;
•
Clean the fuel tank;
•
Clean/replace the air filter;
•
Clean/replace the spark plug;
The combustion engine works irregularly:
•
The air filter is dirty;
•
Clean/replace the air filter;
The combustion engine heats up:
•
The cooling fins are dirty;
•
Combustion engine oil level too low;
•
Clean the cooling fins;
•
Add oil;
Too much smoke:
•
The air filter is dirty;
•
Clean/replace the air filter;
Strong vibrations during operation:
•
Engine fixation is loose;
•
Fasten all the screws;