GETTING STARTED GUIDE
PXIe-5413
20 MHz Bandwidth, 16-Bit PXI Waveform Generator
This document explains how to install, configure, test, and use the PXIe-5413. The PXIe-5413
ships with NI-FGEN driver software, which you can use to program the module.
Note
Before you begin, install and configure your chassis and controller.
Caution
This icon denotes a caution, which advises you to consult documentation
where this symbol is marked.
Caution
You can impair the protection provided by the PXIe-5413 if you use it in
a manner not described in this document.
Contents
Electromagnetic Compatibility Guidelines...............................................................................2
Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 2
Other Equipment....................................................................................................................... 3
Preparing the Environment....................................................................................................... 4
Installing the Software.............................................................................................................. 4
Installing the PXIe-5413........................................................................................................... 5
PXIe-5413 Pinout and LEDs.....................................................................................................6
Configuring the PXIe-5413 in MAX...................................................................................... 11
Self-Calibrating the PXIe-5413.............................................................................................. 12
Generating Waveforms with the NI-FGEN Soft Front Panel................................................. 12
NI-FGEN Instrument Driver...................................................................................................13
Generating Waveforms with NI-FGEN and LabVIEW.......................................................... 13
Troubleshooting...................................................................................................................... 14
Why Is the ACCESS LED Off When the Chassis Is On?...............................................14
What Should I Do if the PXIe-5413 Doesn't Appear in MAX?......................................15
What Should I Do if the PXIe-5413 Fails the Self-Test or Self-Calibration?.................15
Where to Go Next................................................................................................................... 15
PXIe-5413 Firmware Licensing..............................................................................................16
Worldwide Support and Services............................................................................................ 16
