Vitalograph In2itive User Manual
Cat. No. 07514
Issue 5
Page 28 of 45 DT_0006-6
c) Test QA: The session report can be configured to show the
test QA. Select the required option to turn this on or off.
d) Interpretation: The session report can be configured to
show the device suggested interpretation. Select the
required option to turn this on or off.
e) Comments Header: The session report can be configured
to show a Comments Header. Select the required option to
turn this on or off.
f) Ambient Conditions: The session report can be configured
to show the Ambient Conditions. The ambient conditions
(Humidity, Pressure and Altitude) are those entered when
performing an accuracy check or calibration update. Select
the required option to turn this on or off.
g) V/T Size: The Volume/Time graph can be changed from
standard to ATS/ERS 2005 (ATS) requirements. Select the
required option from the drop down list.
h) F/V Size: The Flow/Volume graph can be changed from
standard to ATS/ERS 2005 (ATS) requirements. Select the
required option from the drop down list.
i) V/T Graph: The session report can be configured to show
the V/T (Volume vs. Time) graph. Select the required
option to turn this on or off.
j) F/V Graph: The session report can be configured to show
the F/V (Flow vs. Volume) graph. Select the required option
to turn this on or off.
k) Trend Graph: The session report can be configured to
show the trend graph. Select the required option to turn this
on or off.
Report Method
The In2itive can print to a compatible USB PCL printer or
Vitalograph Reports. The following options are available:
a) Report: Select the option to either Send To PC or External
Printer from the drop down list.
b) Content: The report can be set to print a single page report
or else multi page report. Select the required option from
the drop down list.
c) Auto Print: The report can be printed automatically after
finishing a test session. Select the required option to turn
this facility on or off.
