Vitalograph In2itive User Manual
Cat. No. 07514
Issue 5
Page 27 of 45 DT_0006-6
on the device. To change the setting simply select the on/off
button on the touch panel keypad.
c) The device can be password protected, by setting the on/off
button to the on position. The password can be changed using
the touch panel keypad.
Smart Options
The
Smart Options
allow you to set up the device to follow a set
sequence of operation on power up. In the
Smart Options
screen you
can set Smart on or off by selecting from the drop down list. When set
to on you are given four options:
a) After Power Up: You can either configure the device to go to the
Main Menu or go to the Subject screen after power up. Select
the required option from the drop down list.
b) After Subject: You can configure the device to go to VC Test,
FVC Test or the Main Menu after selecting a subject. Select the
required option from the drop down list.
c) After VC: You can configure the device to go to FVC or the Main
Menu after performing a VC test. Select the required option from
the drop down list.
d) After FVC: You can configure the device to go to POST mode,
Print the test or go to the Main Menu after performing an FVC
test. Select the required option from the drop down list.
Report Options
The
Report Options
screen allows you to set the Report Content and
the Report Method.
Report Content
The information printed on the session reports can be configured to
suit individual requirements. The following can be configured in the
report:
a) Table: The device can be configured to show the results for
the best test only (Best 1) or the three best tests (Best 3).
Select the required option from the drop down list.
b) Normal Compensation: In the session table of results either
the % of Predicted value or the SDS (Standard Deviation
Score) will be printed. Select the required option from the
drop down list.
