Vitalograph In2itive User Manual
Cat. No. 07514
Issue 5
Page 11 of 45 DT_0006-6
Battery Pack
The Vitalograph In2itive is fitted with a rechargeable Battery Pack. This
allows the device to be used without the 5V Power Supply connected.
The battery pack can be re-charged by plugging in the 5 V Power
Supply. To fully re-charge switch off the Vitalograph In2itive and leave
it plugged in over-night.
The battery pack can also be re-charged by connecting the device or
cradle to a PC via the USB cable. The USB connector is located on the
left side of the device.
Battery Low Detect
The Vitalograph In2itive has a number of battery power detect
messages:
When the Battery Pack starts to run low the
Battery Low
icon will flash on and off on the
Main Menu
screen.
You will be allowed to continue to use the device. It is
advised that you plug in the 5V Power Supply or attach
the device to a PC to re-charge the batteries and
continue testing.
When the Battery Pack is approaching fully discharged
the
Battery Discharged
icon will appear continuously on
the
Main Menu
screen.
Plug in the 5V Power Supply or attach to a PC to re-
charge the batteries and continue testing.
O
PERATING THE
V
ITALOGRAPH
D
EVICE
Entering Subject Information
After turning on the device, you are presented with the
Main Menu
screen.
Note: In Smart mode you can configure the device to go directly into
the Subject Select screen. See Smart Options.
