IFU-08, Rev D | Date: November 2019
Page 5 of 39
Chapter 2
Preparing for Monitoring
This chapter describes the steps that must be performed before beginning a monitoring session with the
VistaPoint application.
Step 1: Set Up VistaTablet
a. Unpack the VistaTablet device and become
familiar with its parts. Keep the packaging
that was provided with the VistaTablet.
b. Become familiar with the parts of the
VistaTablet (see Figure 1).
c. Use only the provided cable and charger to
charge the VistaTablet. Keep the VistaTablet
plugged into the charger. You can use the
VistaTablet device while it is charging.
Step 2: Turn On VistaTablet
The VistaTablet should always be ON when you are wearing a VitalPatch biosensor. Note that the screen
will go to sleep (but VistaTablet will remain ON) after a period of inactivity.
•
To Turn ON:
Press and hold the
Power Key
until the VistaTablet vibrates and the screen lights up.
•
To Check if ON:
Tap the
Home Key
. The screen should display.
•
To Turn OFF:
Press and hold the
Power Key
until the Options menu displays, and then select
Power Off
.
If the VistaTablet does not turn on, see “Cannot Power-On VistaTablet” on page 18 for more information.
Figure 1: Identifying VistaTablet Parts