IFU-08, Rev D | Date: November 2019
Page 27 of 39
Figure 36: Model 3230 Spot Check Displayed on VistaPoint application
Once the oxygen saturation (%SpO
2
) value has stabilized, the Model 3230 may be removed from the
patient’s finger. After a short delay, the Model 3230 automatically turns off after the spot check is
complete.
Operating the Model 3230
Refer to the following topics for routine operating procedures:
•
Monitoring Battery Life and Replacing Batteries
•
Pairing a New Model 3230 or Discontinuing Monitoring
•
Model 3230 Status Messages
Monitoring Battery Life and Replacing Batteries
The VistaPoint application does not provide an indication of Model 3230 battery status. However, the
Model 3230 is capable of performing over 2000 spot checks before the batteries require replacement.
For information about checking the Model 3230 battery status and replacing batteries, refer to the
Nonin
Medical Model 3230 Instructions for Use
. After replacing the batteries, you will need to pair the Model
3230 to the VistaPoint application again.
Pairing a New Model 3230 or Discontinuing Monitoring
During normal operation it may be necessary to connect a different Model 3230 Pulse Oximeter to the
VistaPoint application. Tap the
Pair New
button in the Pulse Oximeter section to unpair the Model 3230
from the VistaPoint application and begin the pairing process to a different Model 3230 (or other
supported Pulse Oximeter).