IFU-08, Rev D | Date: November 2019
Page 12 of 39
Dashboard Features
Displayed data parameters include:
•
Heart Rate
(BPM, beats per minute)
•
Respiration Rate
(BrPM, breaths per minute)
•
Temperature
(Celsius or Fahrenheit)
•
If using a VitalPatch biosensor with firmware 1.4.0.x or
earlier, the Skin Temperature will be displayed.
•
If using a VitalPatch biosensor with firmware 3.2.0.x or
later, the Body Temperature will be displayed.
•
Activity
(Steps)
•
Posture
. Can be one of the following values:
Lying Down, Leaning, Running, Standing, Walking, or
Unknown/Uncalibrated.
•
Fall Detection
. Displays either “No Falls Detected” or “Fall
Detected”. If a fall event is detected, the Fall Detection tile
will display a fall status. To clear (acknowledge) the event,
select the
Acknowledge
button in the Fall Detection tile.
•
Live ECG
(mV/s, scale 10mm/mV at 25mm/s). The collection
and display of ECG data is a deployment option that is
controlled by the care provider. Therefore, the ECG display may not be available in the dashboard.
Note:
A “--” indicates that an invalid or out of range value was received. If this is observed, other than
after initial biosensor application, ensure that the biosensor is properly adhered to the patient and wait
several seconds for updated values to be received.
The following data parameters are displayed when the associated data is collected using supported third-
party devices:
•
Pulse Oximeter
(blood oxygen saturation as %SpO
2
)
•
Blood Pressure
(mmHg, systolic and diastolic)
•
Weight
(Pounds)
Figure 14: Supported Postures
Figure 15: Fall Detection