manualshive.com logo in svg

VitalConnect Vista Solution VistaPoint 2.0, Руководство пользователя, Страница: 3 / 39

Поделиться
Скачать
VitalConnect Vista Solution VistaPoint 2.0 Скачать руководство пользователя страница 3

 

 

IFU-08, Rev D  |  Date: November 2019 

Page 3 of 39 

 

Chapter 1 

About This Document 

The VistaPoint™ 2.0 application is used to display physiological information received from the VitalPatch

®

 

biosensor and select third-party devices via the VistaTablet™ 2.0 relay device. The data displayed in the 

VistaPoint application are intended for use by healthcare professionals as an aid to diagnosis and 

treatment. The VistaPoint application can only be used with the VitalPatch biosensor (Firmware version 

1.0.4.0 or higher), the VistaTablet relay device (Samsung Tab E), and select third party devices (listed 

below). 

These Instructions for Use (IFU) describe how to operate the VistaPoint application on the VistaTablet 

device, paired with the VitalPatch biosensor. The document also includes instructions for use for the 

following approved third-party devices in conjunction with the VistaTablet relay device: 

•

  Pulse Oximeter, Nonin Medical, Model 3150 

•

  Pulse Oximeter, Nonin Medical, Model 3230 

•

  Blood Pressure Monitor, A&D Medical, Model UA-651 

•

  Scale, A&D Medical, Model UC-352  

Disclaimer 

This document is not intended to replace the 

Instructions for Use

 (IFU) documents for the VitalPatch 

biosensor nor the approved third-party devices. Always refer to the instructions, indications, 

contraindications and warnings in the IFU documents when using the biosensor and third-party devices.  

Related Documents 

Refer to the following documents for additional information: 

•

  (IFU-02) VitalPatch Instructions for Use (for VitalPatch with Firmware 1.0.4.x) 

•

  (IFU-06) VitalPatch 2.0 Instructions for Use (for VitalPatch with Firmware 3.2.0.x or later) 

•

  (IFU-07) VistaCenter 2.0 Instructions for Use 

•

  (IFU-09) VitalPatch Adhesive Overlay Instructions for Use 

•

  (MKT-080) VistaCenter 2.0 QuickStart Guide 

•

  (MKT-081) VistaPoint 2.0 QuickStart Guide 

•

  Nonin Medical Model 3150 Pulse Oximeter Operator’s Manual 

•

  Nonin Medical Model 3230 Pulse Oximeter Instructions for Use 

•

  A&D Model UA-651 Blood Pressure Monitor Instruction Manual 

•

  A&D Model UC-352 Scale Instruction Manual 

Indications for Use

 

VistaPoint is a software Graphical User Interface intended for use by healthcare professionals to display 

physiological data collected by the Vista Solution  wireless remote monitoring system in home and 

Содержание Vista Solution VistaPoint 2.0








































Отзывы:

Нет отзывов