IFU-08, Rev D | Date: November 2019
Page 14 of 39
Chapter 5
When Monitoring is Complete
When the monitoring session is complete, use the following procedure to disconnect and remove the
VitalPatch.
Step 1: Disconnect VitalPatch in VistaPoint
When monitoring is complete, select
Disconnect
VitalPatch
from the VitalPatch menu. Select one of
the following options:
•
Disconnect VitalPatch:
Choose this option if
you will be applying a new VitalPatch
biosensor.
•
Discharge Patient:
Choose this option if you
will NOT be applying a new VitalPatch
biosensor. All devices will be disconnected.
Step 2: Remove VitalPatch Biosensor
a. To remove the VitalPatch, refer to the
VitalPatch Instructions for Use
(IFU-02 or IFU-06) for
removal instructions.
b. If an adhesive overlay has been applied over the VitalPatch, refer to the
VitalPatch Adhesive
Overlay Instructions for Use
(IFU-09) for removal instructions.
c. If a new VitalPatch biosensor will not be applied, turn off the VistaTablet by pressing and holding
the
Power Key
on the VistaTablet until the Options menu displays, and then select
Power Off
.
Figure 17: Disconnect in VistaPoint