VisionNet SW-80, Руководство пользователя

Страница: 10 / 74

TEC Page 9 of 72
STARTING SW-80 SYSTEM
Turn on the power
Make sure that the line voltage selector in the rear panel is selected correctly.
Press the “POWER” switch in the front panel of the SW-80 to power up the
unit.
Logon
After the system start-up process, the Program logo and the main screen
appear as shown in Figure 1.
Click the “Too Many Files Warning” message box “X” icon to close the message
box.
Click the Log ON/OFF button. A Logon Screen dialog box will pop up for input.
Two default usernames are available: “
SUPER
” and “
OPERATOR
”.
The factory default password is NULL
When you logon as “ SUPER ”, you can click on the Utility button to change the
logon password (to be discussed in more detail later on page 37).
However, if you logon as “
OPERATOR
”, the Utility button will be disabled to
prevent the password and some other system and recording settings from being
modified by the operator.
Figure 1
The main screen Two control panels and various common control buttons are displayed on the
right hand side of the main screen.
The username is shown on the lower left-hand corner.
A progress bar located at the bottom of the screen shows the amount of storage
occupied and available for video recording. The color of the status bar will
gradually change from BLUE – when it is empty to RED – when it is full.
The current time/date is shown on the lower right hand corner.
VisionNet SW-80 User Menu