VisionNet SW-80, Руководство пользователя

Страница: 28 / 74

Page 27 of 72
Port Setting
The port setting is about the COM port (the serial port) connection preferences.
The default of the connection preferences is as the following figure.
Please refer to individual OSRD connection preferences for correct setup of the
connection preferences.
Camera Selection The camera selection box in the PTZ control panel is for selecting the desired
camera for PTZ control.
Monitor Selection While the MV912RS protocol is selected, there will be a monitor selection box in
the PTZ control panel.
Speed control The speed of movement of the pan-tilt head can be controlled. The slide bar is to
control the speed of movement.
Pan-tilt zoom
control
Once the camera is selected, click the arrow buttons for corresponding direction
movement, the focus and zoom control.
Pre-position The positions of the pan tilt head can be saved so that camera can repeat its
position when wanted.
Set Pre-position
Use the “Pre-position” box to enter the pre-position number.
Once the number is selected, pan/tilt the camera to a desired position and then,
press “Set” button to assign this position into that particular pre-position number.
Show Pre-position
Use the “Pre-position” box to enter the pre-position number.
Once the number is selected, press the “Show” button to send the camera to the
saved pre-position.
Pre-position hot keys
Four hot keys are implemented for four frequently used pre-positions.
Once programmed, press these hot keys will send the camera to it’s pre-position
accordingly.
VisionNet SW-80 User Menu