VisionNet SW-80, Руководство пользователя

Страница: 7 / 74

Page 6 of 72
Archive Backup
System Mode
Considering the total process ( record-optional playback-backup-optional restore-
erase obsolete video-recycle storage media for record) of recording of the videos
for Surveillance purpose, we can come up with two different backup system
modes:
Normal Mode – The SW-80 Digital Surveillance Recorder will record all new
video into the Fixed Hard Drive (s). As required, the operator of
the
backup the recorded video to an Removable
IDE drive via the Housekeeping function from the Utility Menu
The raw copy of video can optionally be deleted during the
backup process
Archive Mode- The SW-80 Network Digital Surveillance Recorder will record all new
video into one of the assigned Removable IDE drive. When it is
about full, it can be removed from the recorder (system control
or physically) for additional archiving to DAT or other backup
media. The
Digital Surveillance Recorder will
maintain continuous recording to an alternate removable drive
during the archiving operation. When the videos inside a
Removable drive is obsolete, they can be erased immediately
before video recording is resumed on this drive.
Audio Recording
Option
recording function can be enabled and have the recording attached to one of the
active camera. To setup audio recording, please refer to the Attaching audio to
camera of the Option Setting Menu.
Before you can activate this function, you will need to have a Sound (Capture)
board installed and properly configured to the SW-80 Network Digital Surveillance
Recorder, as follows:
Click Start-> Programs-> Accessory -> Entertainment -> Volume Control
Click Properties from the Options Menu.
Select the Playback check: Make sure the Microphone option is selected
from the “Show all volume control” list box. Click apply and OK, then make
sure the Microphone is Muted at Playback.
Repeat the same steps for Recording, only for this time, the Microphone (or
any other input port you may choose as an input feed to the sound board as
the recording source) is selected in this case.
You will need to adjust the volume of input and output by using the sound
recorder which is built in with the Operating System.
Audio
SW-80
SW-80 can
The backup system mode of SW-80 Network Digital Surveillance Recorder should
be selected at the very beginning of overall system operation. The normal backup
mode is set by default. To switched to the Archive mode, please refer to the Backup
Function of the Options Setting Menu. You will need to have two removable IDE
drives configured in the SW-80 Digital Surveillance Recorder to support this mode
of system operation. The SW-80 application needs to be closed and restart to apply
the mode switching from each other.
VisionNet SW-80 User Menu