VisionNet SW-80, Руководство пользователя

Страница: 53 / 74

Appendix I
DSR Configuration at Control Panel
(New feature)
In order to seamlessly integrate the DSR with the Windows environment, a DSR
configuration icon is implemented in the Control Panel of the server machine.
User can go to the Control Panel (Start->Settings->Control Panel) and double click
the DSR configuration icon to invoke the DSR configuration dialog.
A "Logon" dialog box will pop up for password protection. User uses the SUPER
as username and the corresponding password to logon for DSR configuration
operation.
User can configure the DSR prior to run the DSR program.
The available DSR configuration settings are listed in the following table:
Alarm Alert Enable
Enable the Alarm Alert function.
Alarm Files Overwrite Enable
By default, the alarm files will not be deleted during circular mode. However, user can check the
enable box in the dialog to allow oldest alarm files to be deleted during circular recording.
Note:
Motion detection triggered and hardwires triggered alarm files are treated equally as alarm files.
Configuration backup and restore
This utility allows user backup the DSR configuration prior to install or re-installs the DSR
software in order to prevent loss of configuration data. Also, a DSR configuration template disk
can be prepared for easy DSR setup during mass production.
The configuration parameters to be backup include the following items:
Page 52 of 72
VisionNet SW-80 User Menu