VisionNet SW-80, Руководство пользователя

Страница: 63 / 74

·
·
·
·
·
·
·
Through LAN
Connection ·
·
·
·
·
·
·
·
Inside the Connect to input box, click the down arrow to select connection
from the available connection name inside the Dial-up Networking folder.
Make sure to check the Save password box.
Input the IP address of the remote unit in the Alarm Alert Receiver Name/IP
box.
Click Apply and OK to end set up.
Alarm Alert Receiver setup in Remote unit
A Dial-up Server should be installed in the remote unit to allow the remote unit
to receive telephone call.
The Dial-up Adapter of the remote unit should have TCP/IP protocol attached
and with a fixed IP address assigned by the administrator.
Please refer to the Appendix of How to Setup a Dial-up Connection in order to
set up the remote unit as a Dial-up server machine.
Alarm Alert Caller setup in DSR unit
DSR should have the LAN connection correctly setup so that it can see the
remote unit inside its Network Neighborhood.
After the DSR software is started, press the "Windows" button in the keyboard
to show the task bar.
Right click the Alarm Alert icon in the task bar to show the Alarm Alert Caller
Setup window.
Select LAN in the Connection Mode.
Input the computer name or the IP address of the remote unit in the Alarm Alert
Receiver Name/IP box.
Alarm Alert Receiver setup in Remote unit
Page 62 of 72
VisionNet SW-80 User Menu