VisionNet SW-80, Руководство пользователя

Страница: 27 / 74

Page 26 of 72
PAN-TILT ZOOM CONTROL
Pan-tilt Zoom
Using the pan-tilt zoom function, the camera can zoom in or out to adjust the
view angle of the camera for a better image, or it can pan and tilt the camera to
different position of interest for better surveillance.
Click the PTZ icon button besides the “EXIT” button to activate the PTZ panel.
Note:
The camera number setting of the On Site Receiver Driver (OSRD)
should be set up correctly with the same camera number as the
camera attached to it.
Driver Mode
Setting Right click the mouse on anywhere of the PTZ Panel, a menu will appear which
can select the MODE, PORT SETTING or EXIT.
Select the MODE item, a sub menu will show up the item MV912RS, Old OSRD
Code, PTZ Receiver Driver and/or other available Custom’s option. After your
selection, a tick will appear left to the item.
Note :
To run the pan-tilt function properly, you should match the OSRD
with the selected protocol.
VisionNet SW-80 User Menu