8
marcha de la herramienta en vacío y sin ser utilizada
realmente ya que la reducción de estos últimos puede
disminuir de forma sustancial el valor total de exposición).
17. GARANTÍA
Todas las máquinas electroportátiles VIRUTEX, tienen una
garantía válida de 12 meses a partir del día de suministro,
quedando excluidas todas las manipulaciones o daños
ocasionados por manejos inadecuados o por desgaste
natural de la máquina. Para cualquier reparación, dirigirse
al servicio oficial de asistencia VIRUTEX, S.A.
18. RECICLAJE DE LAS HERRAMIENTAS ELÉCTRICAS
Nunca tire la herramienta eléctrica con el resto de resi-
duos domésticos. Recicle las herramientas, accesorios y
embalajes de forma respetuosa con el medio ambiente.
Respete la normativa vigente de su país.
Aplicable en la Unión Europea y en países europeos con
sistemas de recogida selectiva de residuos:
La presencia de esta marca en el producto o en el
material informativo que lo acompaña, indica que al
finalizar su vida útil no deberá eliminarse junto con
otros residuos domésticos.
Conforme a la Directiva Europea 2002/96/CE los usuarios
pueden contactar con el establecimiento donde adquirie-
ron el producto, o con las autoridades locales pertinentes,
para informarse sobre cómo y dónde pueden llevarlo
para que sea sometido a un reciclaje ecológico y seguro.
VIRUTEX se reserva el derecho de modificar sus productos
sin previo aviso.
E N G L I S H
SRI174T PLUNGE-CUT SAW
Important
Read these OPERATING INSTRUCTIONS and
the attached GENERAL SAFETY INSTRUCTIONS
LEAFLET carefully before using the machine.
Make sure you have understood them before
operating the machine for the first time.
Keep both sets of instructions for any future
queries.
1. SAFETY INSTRUCTIONS FOR USING THE
PLUNGE-CUT CIRCULAR SAW
1.1 GENERAL INSTRUCTIONS
• We recommend that, while using the machine, you
keep the documents relating to it within reach, so that
you can consult them if necessary while working. We
also recommend that if possible, you keep a copy in a
safe place.
• Check the condition of the plug and cable every time
you use the machine.
• Unplug the power supply before handling the machine.
• Always keep the cable away from the moving parts
of your machine.
• Only plug into the power socket with the machine
switched off.
• If you need to use an electric extension lead, the wires
must be at least 1 mm
2
in diameter and the cable must
be completely unwound.
• Use a blocking device for the piece you are going
to work on whenever possible, so that it does not slip.
• In the event of jamming, turn the machine off imme-
diately and unplug the power supply. Do not resume work
without having removed the cause of the jamming. If this
is inside the machine, give it to an authorised technician.
• Before using an accessory, make sure that its maxi-
mum rotation speed is compatible with the machine’s
performance.
• As far as possible, always use protective equipment
such as gloves, goggles, safety shoes, etc. Off-cuts can
lead to injuries.
• Before cutting on a wall, floor or ceiling, make sure
there is no pipework behind it.
• Power tools must not be used by people under 16
years old.
• Only bring the machine in operation near to the piece
being worked on.
• Both above and below the cut path must be free of
obstacles.
• Do not put your fingers in the shavings ejection nozzle.
• Keep your hands away from the moving saw. Avoid
contact with the saw blade that protrudes from the
lower part of the unit.
• Do not use the machine above your head.
• Do not work with materials containing asbestos.
• Do not use blades with a base disk that is thicker or
with a kerf that is smaller than the thickness of the
dividing knife.
• The cutting guide must be readjusted when changing
circular saws with different diameters.
• When the machine is turned off, wait for the blade
to stop by itself. Never stop the blade by pressing on it
from the side or in the centre.
• Always use the dividing knife.
• Never force a machine that appears to have operating
difficulties or shows some sort of weakness. There may
Содержание SRI174T
Страница 3: ...3 Fig 9 Fig 10 Fig 11 Fig 12 Fig 5 Fig 6 Fig 8 Fig 7 2 4 mm 2 4 mm F G G E L K J 7445818 N P...
Страница 31: ...31 1 2 1 3 2 50 60 Hz 1150 W 5500 160 90 55 45 35 4 7 A 89 A A 100 A K 3 A...
Страница 33: ...33 3 11 5 12 800 1400 11 J 8 2 6045710 9 2 7445819 10 13 6 4 L 6 7 14 7406518 800 SRI174T UCP 7406519 1400...
