Viper 50000589, Инструкция по эксплуатации, Страница: 13 / 333

INSTRUCTION FOR USE ENGLISH
9
OPERATING GUIDE
Read operators manual thoroughly prior to operating or servicing this machine
1) Using a hose or bucket, fill tank with a maximum of 1 gallon of water (water temperature is less than
50℃) .
Do not use flammable liquids or operate machine in or near flammable liquids or vapors
2) Connect the solution hose and vacuum hose to the machine.
3) Connect the power cable to a grounded wall outlet. (see grounding instructions)
MACHINE OPERATION
PRIOR TO REMOVING SPOTS
1) Inspect power cable for damage. Replace cable if damage is found.
2) Vacuum carpet to remove debris prior to extracting the spot.
SPOT REMOVAL
1) Place the power switch in the “I” position.
NOTE: Solution will only spray when the spray handle (on the hand tool) is pulled.
2) To start cleaning, pull the spray handle (hand tool) and begin to pull the tool backwards over the spot.
3) Release spray handle when you have reached the end of the spot. Continue to pull hand tool back for an-
other 4 inches to pick up excess solution.
4) Continue until spot is removed.