VIOLIN SYSTEMS 7700, Руководство по установке

Страница: 147 / 208

Configuring Brocade 6510 for a 7700 FSP System
530-0267-00 Rev 02
7700 Flash Storage Platform Installation Guide 7.6.3.x
141
3.
Inspect the FC switch IP and hostname by issuing the "
fabricshow
" CLI command, as
shown:
4.
Change the default FC switch DNS configuration by issuing the "
dnsconfig
" CLI command,
as shown below:
Note:
The DNS server IP addresses listed in this step (10.5.0.12 and 10.5.0.13) are example
DNS server IP addresses.
5.
Inspect the FC switch time zone (default is UTC) by issuing the "
tstimezone
" CLI
commands, as shown:
To set the time zone offset or zone:
To navigate to set your time zone:
6.
Set the NTP time server by issuing the "
tsclockserver
" CLI command, as shown in the
following single and multiple NTP time server examples:
To set for a single NTP time server:
FC7700-switch-a:root> fabricshow
Switch ID Worldwide Name Enet IP Addr FC IP
Addr Name
1: fffc01 10:00:50:eb:1a:6d:1b:f0 10.5.76.81 0.0.0.0 "FC7700-switch-a"
FC7700-switch-a:root> dnsconfig
1 Display Domain Name Service (DNS) configuration
2 Set DNS configuration
3 Remove DNS configuration
4 Quit
Select an item: (1..4) [4] 2
Enter Domain Name: [] eng.vmem.int
Enter Name Server IP address in dot notation: [] \
10.5.0.12
Enter Name Server IP address in dot notation: [] \
10.5.0.13
DNS parameters saved successfully
Enter option
1 Display Domain Name Service (DNS) configuration
2 Set DNS configuration
3 Remove DNS configuration
4 Quit
Select an item: (1..4) [4] 4
FC7700-switch-a:root> tstimezone <+ or - ><hours-offset>,
<+ or - ><minutes-offset)
FC7700-switch-a:root> tstimezone --interactive
FC7700-switch-a:root> tsClockServer 192.168.0.1
Updating Clock Server configuration...done.
Updated with the NTP servers.