VIOLIN SYSTEMS 7700, Руководство по установке

Страница: 115 / 208

Setting up High Availability (HA) and Failover
530-0267-00 Rev 02 7700 Series Flash Storage Platform Installation Guide 7.6.3.x 109
1.
Do you want to modify these settings? (y/n:) y
2.
Enable configuring HA using this preconfiguration file (true/false) [ true ]:
3.
Configure for Mutual Failover (true/false) [ true ]:
4.
Enter the primary server hostname [violin3550]:
hostname
-mg-a
This is the hostname for Memory Gateway A.
5.
Set the primary server's Storage Cluster Interlink IP address (nnn.nnn.nnn.nnn)
[192.168.200.50]:
192.168.0.0
6.
Set the primary server's power control IP address (nnn.nnn.nnn.nnn) [10.5.5.206]:
169.254.1.101
7.
Enter the interface (eth0/eth1/rep0/sci0/eth0.10) [ eth0 ]:
8.
Enter the primary server's Virtual IP address (nnn.nnn.nnn.nnn) [10.5.5.207]:
<mg-a
assigned virtual IP>
Enter the physical address of Memory Gateway A. This IP address is assigned to eth0:0, and
this is the value required by Symphony.
9.
Enter the primary server's Heartbeat IP address (nnn.nnn.nnn.nnn) []:
mg-a assigned
monitor IP>
This is a secondary IP address on the same subnet as the primary server’s virtual IP address.
This IP address is assigned to eth0, and to verify this, use the
ipconfig
command.
10.
Enter another Virtual and Heartbeat IP address pair? (y/n): n
11.
Enter the primary server's quorum drive selection (any / A:C:S:L) [any]:
<mg-a
configuration device>
(for example, 98:0:4:2).
This is the ACSL value used for the configuration device for Memory Gateway A.
12.
Enter the primary server's quorum mirror drive selection (any / A:C:S:L / none) []: none
13.
Enter the secondary server hostname [violin3554]:
hostname
-mg-b
This is the hostname for Memory Gateway B.
14.
Set the secondary server's Storage Cluster Interlink IP address (nnn.nnn.nnn.nnn)
[192.168.200.54]:
192.168.0.1
15.
Set the secondary server's power control IP address (nnn.nnn.nnn.nnn) [10.5.5.198]:
169.254.1.102
16.
Enter the interface (eth0/eth1/rep0/sci0/eth0.10) [ eth0 ]:
17.
Enter the secondary server's Virtual IP address (nnn.nnn.nnn.nnn) [10.5.5.199]:
<mg-b
assigned IP>
18.
Enter the secondary server's Heartbeat IP address (nnn.nnn.nnn.nnn) []:
mg-b assigned
monitor IP>
19.
Enter another Virtual and Heartbeat IP address pair? (y/n): n
20.
Enter the secondary server's quorum drive selection (any / A:C:S:L) [any]:
<mg-a
configuration device>
(for example, 98:0:5:2).
21.
Enter the secondary server's quorum mirror drive selection (any / A:C:S:L / none) []: none
22.
Ensure that all values entered are correct and then enter “ y ” to commit these settings.