VIOLIN SYSTEMS 7700, Руководство по установке

Страница: 130 / 208

Appendix B - Overview: 7700 FSP Controller
124
7700 Flash Storage Platform Installation Guide 7.6.3.x
530-0267-00 Rev 02
4.
In the Alerts page, click SNMP and Email Settings , and navigate to the SMTP (E-mail)
Server Address Settings pane.
5.
In SMTP (Email) Server IP Address or FQDN/DNS Name , enter a valid Fully Qualified
Domain Name hostname or IP address of the SMTP (E-mail) Server, and click Apply .
6.
Navigate to the Destination Email Addresses pane, and perform the following:
•
Enter a recipient e-mail address in Destination Email Address .
•
Select the State check box to activate this e-mail address and click Apply .
•
Click Send and confirm that the designated recipient received an e-mail alert message.
7.
In the Alerts page, click Alert Recurrence , and in the Customize Alert Recurrence pane,
set interval values (in days) for repeating alerts in Recurrence for Severity Warning and
Critical events, and click Apply .
Note:
It is recommended that you enter a 1 (in the Days field) under the Recurrence column
for Severity Critical events.
8.
In the Alerts page, click Alerts tab, and in the Alerts Filter pane, make sure that all of the
Category and Severity check boxes are selected, and click Apply .
9.
In the Alerts and Remote System Log Configuration pane, click the Email check box in the
column head to select e-mail notifications for all categories of System Health alerts (or select
the individual
Email check box for those alerts for which you want e-mail notifications).
10.
Click the right-arrow page control (adjacent to Apply button) to complete the selection of
Email check boxes, and click Apply .