Vincent Associates UNIBLITZ VMM-T1, Руководство пользователя

Страница: 37 / 43

VMM-T1 User Manual 37
External Output Characteristics
Name Description
PULSE OUTPUT (BNC)
Rear Panel

Active-low only

Source impedance: 1K ohms

Maximum source current: 5.0 mA

Maximum sink current: 100 mA

Maximum (low-level) output voltage: 0.5 VDC

Minimum high level: +4.5 VDC

Duration time determined by width of active
pulse applied to PULSE Input or Exposure
Time setting
SYNC. OUTPUT (BNC)
Rear Panel

Active-low only

Source impedance: 1K ohms

Maximum source current: 6.8 mA

Maximum sink current: 25.0 mA

Maximum (low-level) output voltage 0.5 VDC

Minimum High Level: +4.5 VDC

This output provided for shutters equipped
with the Electronic Synchronization (SYNC)
option.
Delay Out (AUX Pin 1)
Rear Panel

Active-high only

Source impedance: 1K ohms

Maximum source current: 5.0 mA

Maximum sink current: 100 mA

Maximum (high-level) output voltage: +5.0
VDC.

Duration time determined by Delay Time
setting. (Delay interval can be set before
exposure or after with PRE/POST toggle
switch.)
+5V (AUX Pin 3)
Rear Panel

+5.0 volt DC regulated output provided for use
in remote switching and/or control circuits.
GND (AUX Pin 2)
Rear Panel

0 VDC ground reference provided for AUX
output pins (located on rear panel).
General Characteristics
Name Description