VMM-T1 User Manual
33
General Care
Perform routine inspection of the
VMM-T1
on a regular basis.
Inspect the outer case for any signs of visible damage
Pay particular attention to the condition of the AC line cord. If there are any signs of damage or
deterioration, replace it immediately with an approved line cord.
Follow the
Exterior inspection and Cleaning Procedures
elsewhere in this manual.
Inspection and Cleaning
Inspection – Exterior
Inspect the outside of the
VMM-T1
for damage, wear, and missing parts. A device that appears to have
been dropped or shows other signs of exterior damage should be checked thoroughly to verify correct
operation and performance. If damage is suspected, please return the unit to the factory for repair –
there are no user-serviceable parts.
Cleaning Procedure – Exterior
1.
Remove loose dust on the outside of the
VMM-T1
with a lint free cloth.
2.
Remove remaining dirt with a lint free cloth dampened in a general purpose detergent-and-water
solution. Do not use abrasive cleaners.
Inspection – Interior
Do not attempt to open the case of the
VMM-T1
under any circumstances. There are no user-
serviceable parts inside the case.
Cleaning Procedure – Interior
Do not attempt to open the case of the
VMM-T1
under any circumstances. There are no user-
serviceable parts inside the case.
CAUTION
To prevent getting moisture inside the unit during external cleaning,
use only enough liquid to dampen the cloth or applicator.
