Vimar ACTO 404D, Инструкция по установке и эксплуатации

Страница: 22 / 76

20
1 mm
1 mm
1 mm
1 mm
1 mm
Fig. 18 Fig. 19 Fig. 20
Fig. 21
Fig. 22 Fig. 23
Securing the limit switch brackets
Manually unlock the gear motor, move the gate to the point where it is completely open, secure the bracket of the limit switch A so that the magnet matches
the sensor, move the gate to the point where it is completely closed, and secure the bracket of the limit switch B so that the magnet matches the sensor. After
testing, check the stopping point, the gate must stop approximately 1 or 2 cm before the mechanical stops.
N.B. The magnets fixed in the brackets must not be swapped over under any circumstances.
Apertura Chiusura
Start of limit
switch reading
point
A
B
Fig. 24
Fig. 25
EN