34
Premium, Comfort, & X Series Door
Removal
Step 1:
Remove hardware - Remove all door mounting bolts (2
or 3 per side) and trim strips.
Step 2:
Remove door - Carefully pull bottom of door out
toward you. Carefully grab the bottom corner of the door and pull
it out enough that you can slip your other hand in behind the side
of the door about 4-5 inches up from the bottom. From there
you will pull the door firmly away from the spa until the snap
on the door pulls out of the snap feature in the rib. Continue to
pull the door away until the second snap on the other side pulls
out. The door can then be dropped out of the groove on top and
removed from the spa.
Step 3:
Electrical Disconnect – be sure to disconnect any
lighting or any other electrical wiring that is mounted onto the
door before completely removing it.
Step 4:
When removed, lean door against spa.
To reinstall spa door, reverse the instructions above.
A,R & X Series Door Installation
Step 1:
Electrical –Reconnect any lighting or electrical devices
on the door before installing.
Step 2:
Door – Slip the upper lip of the door into the top
behind the lip of the spa. Lower the door while gently pushing
on it until you feel the snaps line up with the snap features in the
ribs.
Step 3:
Starting from one side, secure the first snap into place
by pressing firmly on the cabinet door in the location indicated
below. Once the clip snaps into place, repeat the process with the
second clip.
Step 4:
Hardware - Replace trim strips and mounting bolts.
X6R Door Removal
Step 1:
Remove hardware - Remove all door mounting bolts (3
per side) and trim strips.
Step 2:
Remove door – Pull the bottom of the door forward, the
door can then be dropped out of the groove on top and removed
from the spa.
Step 3:
Electrical Disconnect – be sure to disconnect any
lighting or any other electrical wiring that is mounted onto the
door before completely removing it.
Step 4:
After the door has been completely removed, lean door
against spa.
X6R Door Installation
Step 1:
Electrical –Reconnect any lighting or electrical devices
on the door before installing.
Step 2:
Door – Slip the upper lip of the door behind the lip of
the spa. Place door securely against spa flush with the side panels.
Step 3:
Hardware - Replace trim strips and mounting bolts.
REFERENCE MATERIAL
Before attempting to install or use your spa, please read
Important Safety Instructions as well as all the installation
instructions that follow.
Site Selection and Preparation
Your home most likely offers multiple sites where your spa may
be installed. Use the information presented in this section
to assist you in carefully selecting the site that works best
for you. It is your responsibility to choose and prepare the
2016 V&B Owners Manual.indd 34
3/3/2016 1:46:49 PM
