12
Heat Mode Ready vs. Rest
When in “Ready” mode, the pump that circulates water through
the heater (heater pump)will turn on every 1/2 hour to measure
water temperature, heat if needed, and refresh the temperature
display. When in Ready mode your spa will continually maintain
its set temperature.
“Rest” mode is an economy mode in which the spa only
circulates and heats water during designated filter cycles. As a
result, in the time period between filtration cycles the control may
not display the correct water temperature unless the heater pump
is on and has been running for up to two minutes. When in
Rest mode your spa will heat to its set temperature twice per day
during programmed filter cycles.
Ready-in-Rest Mode
When the spa is in Rest mode and a “Jet” button is manually
pressed, the spa will enter Ready-in-Rest mode and heat up to
the selected temperature, allowing for use in periods outside of
scheduled filter cycles.
Light Settings
T
he spa lights are activated by pressing the
icon. Pressing
this icon turns off or on your interior or exterior lights manually.
By turning the light off and then on again, you can choose the
light color and display properties. Each time the light is turned
off and on it will advance according to the following sequence:
1. Color wheel: Color changes quickly through available
solid colors.
2. Color fade: Colors fade through spectrum A colors.
3. Random Color Change: Random color changes occur in
quick succession.
4. Spectrum fade: Colors fade through spectrum B colors.
5. Solid Color: Red
6. Solid Color: Green
7. Solid Color: Blue
8. Solid Color: Yellow
9. Solid Color: Indigo
10. Solid Color: Orange
11. Solid Color: Violet
12. Solid Color: White
Light Settings (Premium Series)
Premium Series spas come equipped with a light timer.
To set the light timer, from the main menu, select
and then
. To enable the timer, press the [Disabled]
icon. Set the desired time and duration or the timer by
pressing on the pad above the time you wish to adjust
Light Settings
Interior
Light Timer
Exterior
Start
End
10:45
am
10:45
am
and then using the
and icons to choose the desired time
and duration. Press the
icon to confirm your selections.
Light Settings (Design Series)
Design Series spas come equipped with the ability to
independently control the interior and exterior lights with a light
timer. The
button on the main control screen will operate
the interior and exterior lights according to setting designated in
the Light Settings screen.
Light Settings
Interior
Light Timer
Exterior
Start
End
10:45
am
10:45
am
To set the light timer, from the main menu, select
and then
. To change the interior/exterior setting or to set the light
timer, from the main menu, select
and then
To engage the interior lights press the Interior button. To engage
the exterior lights press the Exterior button. To enable the timer,
press the [Disabled] icon. Set the desired time and duration
or the timer by pressing on the pad above the time you wish
to adjust and then using the
and icons to choose the
desired time and duration. Press the
icon to confirm your
selections. The light timer will turn on the interior and exterior
lights according to the current Interior and Exterior button
positions.
2016 V&B Owners Manual.indd 12
3/3/2016 1:45:39 PM
