16
Press-and-Hold
If an
Up or Down button is pressed and held when the
Set Temperature is selected, the temperature will continue to
change until the button is released, or the Temperature Range
limits are reached.
The Spa Screen
One Press Activation
The Spa Screen shows all available equipment to control, as well
as Invert, in one easy-to-use screen. Each button is fixed on a
specific function and can be used as a very simple user interface
for the spa. The display shows icons that are related to the
equipment installed on a particular spa model, so this screen may
change depending on the configuration.
The pumps have more than one ON state, so the icon will change
to reflect the state that the equipment is in. Below are some
examples of 2-speed Pump indicators:
NOTE:
The icon for the pump that is associated with the
heater (Filtration Pump) will have a red glow in the center when
the heater is running.
Light Operation
By turning the light on and off, it will change the sequence of
colors from flashing, to fading, to solid color in the following
sequence:
1. Color wheel: Color changes quickly through available
solid colors.
2. Color fade: Colors fade through spectrum A colors.
3. Random Color Change: Random color changes occur in
quick succession.
4. Spectrum fade: Colors fade through spectrum B colors.
5. Solid Color: Red
6. Solid Color: Green
7. Solid Color: Blue
8. Solid Color: Yellow
9. Solid Color: Indigo
10. Solid Color: Orange
11. Solid Color: Violet
12. Solid Color: White
The Settings Screen
The Settings Screen is where all programming and other spa
behaviors are controlled. This screen has several features that can
be acted on directly. These features include Temp Range, Heat
Mode, and Invert Panel. When one of these items is highlighted,
the Select Button is used to toggle between two settings. All
other menu items (with an arrow pointing to the right) will take
you to another level in the menu.
Press-and-Hold
If an Up or Down button is pressed and held when an item in a
Menu List is highlighted, the list can be scrolled quickly from top
to bottom. The scroll bar on the right side of the screen indicates
the relative position of the highlighted item in the list.
Dual Temperature Range
(High vs. Low)
Your spa comes equipped with two temperature range settings
with independent set temperatures. The specific range can be
selected on the Settings screen and is visible on the Main Screen
in the upper right corner of the display. High Range can be set
between 80°F (26.7°C) and 104°F (40°C). Low Range can be
set between 50°F (10°C) and 99°F (37.2°C). The most common
use for the low range is during vacations or extended periods of
inactivity. Freeze Protection is active in either range.
Heat Mode – Ready vs. Rest
When in “Ready” mode, the pump that circulates water through
the heater will turn on every 1/2 hour to measure water
temperature, heat if needed, and refresh the temperature display.
When in Ready mode your spa will continually maintain its set
temperature. REST mode is recommended for most economic
performance.
Ready-in-Rest Mode
READY/REST appears in the display if the spa is in Rest Mode
and the Jets 1 Button is pressed. It is assumed that the spa is
being used and will heat to set temperature. While Pump 1
High can be turned on and off, Pump 1 Low will run until
set temperature is reached, or 1 hour has passed. After 1
The Spa Screen
The
pumps have more than one ON state, so the icon will change to refl ect the state that the equipment is in.
Below are some examples of 2-speed Pump indicators.
Jets High
Jets Low
Jets Off
NOTE: The icon for the pump that is associated with the heater (Circ or P1 Low) will have a red glow in the center when the
heater is running.
One-Press Activation
Ready in Rest Mode
Heating
S
pa Equipment
Jets
1
Jets
2
Light
Back
The Spa Screen shows all available equipment to control, as well as Invert, in one easy-to-use screen. Each button is
fixed on a specific fuction and can be used as a very simple user interface for the spa
The display shows icons that are
related to the equipment installed on a particular spa model, so this screen may change depending on the installation.
Invert
8:32 PM
104°F
2016 V&B Owners Manual.indd 16
3/3/2016 1:45:57 PM
